เนื้อหาของบทความนี้จะพูดถึงcpu fm2+ หากคุณต้องการเรียนรู้เกี่ยวกับcpu fm2+มาวิเคราะห์หัวข้อcpu fm2+ในโพสต์How to clean a CPU socket… and a thermo paper trick – PWJ182นี้.

ข้อมูลที่สมบูรณ์ที่สุดเกี่ยวกับcpu fm2+ในHow to clean a CPU socket… and a thermo paper trick – PWJ182

ดูตอนนี้วิดีโอด้านล่าง

ที่เว็บไซต์Telecomjournalthailand.comคุณสามารถเพิ่มข้อมูลอื่นๆ นอกเหนือจากcpu fm2+สำหรับข้อมูลที่เป็นประโยชน์มากขึ้นสำหรับคุณ ในหน้าTelecomjournalthailand.com เราอัปเดตเนื้อหาใหม่และถูกต้องให้คุณทุกวัน, โดยหวังว่าจะมีส่วนสนับสนุนเนื้อหาที่สมบูรณ์ที่สุดสำหรับผู้ใช้ ช่วยให้ผู้ใช้สามารถอัพเดทข้อมูลบนเครือข่ายได้รวดเร็วที่สุด.

การแบ่งปันบางส่วนที่เกี่ยวข้องกับหัวข้อcpu fm2+

ข้อผิดพลาดของหน่วยความจำคอมพิวเตอร์และข้อผิดพลาดของ CPU มักเกิดจากสิ่งสกปรกและไขมันใน CPU หรือซ็อกเก็ตหน่วยความจำ นี่คือวิธีที่ฉันทำความสะอาด เป็นวิธีที่พิสูจน์แล้วและประสบความสำเร็จ แล้วฉันก็ไปสะดุดกับปรากฏการณ์แปลกๆ ด้วยกระดาษเทอร์โมและฟิล์มกาว…. BTW: แอลกอฮอล์ที่ฉันใช้คือไอโซโพรพานอล 99% อย่าใช้สปิริตปกติ!

รูปภาพที่เกี่ยวข้องกับหมวดหมู่cpu fm2+

How to clean a CPU socket… and a thermo paper trick – PWJ182

นอกจากดูข่าวเกี่ยวกับบทความนี้แล้ว How to clean a CPU socket… and a thermo paper trick – PWJ182 คุณสามารถอ่านเนื้อหาเพิ่มเติมด้านล่าง

คลิกที่นี่เพื่อดูข้อมูลเพิ่มเติม

ข้อมูลบางส่วนที่เกี่ยวข้องกับcpu fm2+

#clean #CPU #socket #thermo #paper #trick #PWJ182.

[vid_tags].

How to clean a CPU socket… and a thermo paper trick – PWJ182.

cpu fm2+.

หวังว่าบางค่าที่เราให้ไว้จะเป็นประโยชน์กับคุณ ขอบคุณมากสำหรับการอ่านบทความของเราเกี่ยวกับcpu fm2+

38 thoughts on “How to clean a CPU socket… and a thermo paper trick – PWJ182 | อัปเดตใหม่cpu fm2+เนื้อหาที่เกี่ยวข้อง

  1. Wind Ward says:

    This video is basically about repairing an intermittent fault or error on a mother board with suspect dirty mechanical connections, either memory or CPU, or any other mechanical connection like PCIe, etc. Before handling electronics you should be ESD safe. If you look closely at his work surface it looks like a steel work table which is probably grounded, and even if not grounded will certainly prevent static voltage gradients (after you discharge yourself to it). I like steel (especially SS) tables unless the board your working on still has charged caps, which is propably more applicable to power supply repair. So I like putting an antistatic mat on top of the steel table. Then I can handle the board and discharge caps as a first step if need be with out the danger of shorting out a charged cap on a metal surface. SS really cleans up nice especially if you handle a lot of liquid flux and/or perform messy soldering tasks.

    Although it is not written in the Intel LGA771 socket (Old Xeon) mechanical design guide, it looks to me like the pins are spring loaded and the CPU when seated and latched compresses the spring contacts (gold plated on the contact end) to a specific distance without bottoming out the contacts in their respective guides. So spring force is holding the contact against the CPU land. As with most wiping contacts I feel adding a contact cleaner with lubricating properties as an advantage. So I would be interested to find out after cleaning with alcohol what if I then treat the CPU pins with Deoxit Gold G100L (Liquid in a bottle with a little brush) to help protect the gold surfaces and lubricate the pins in their guides (Reduce sliding friction). I am in the USA so I can order Deoxit from Digikey. You can by Deoxit in many different application formats, like they offer wipes for edge connectors.

    Edit: Obviously the above is about a board that has been already in service. If you are building your own servers or PCs, before assemply always inspect all of the pin and socket connections. I use a stereo zoom microscope and have spotted partrially bent pins on connectors which I was able to straighten out before assembly. A slightly bent pin will become a smashed pin unless it is straighten before attempting the first connector mating.

  2. Prince Vegeta says:

    My friend you are a lifesaver! I took apart my rig for cleaning and the paste I had applied had migrated to the edge of my cpu so as soon as I pulled it up the paste flicked right into the socket! Thanks to your guide here tho absolutely nothing bad came of it I was able to clean it up 100% and everything is back to normal

  3. The Humphreys says:

    It definitely feels like prank advice when you see a person soaking down these electronics with alcohol, but I believe you. I saved a drowned iphone one time by taking it a apart and using 99% alcohol to displace and dry the water. It's still scary to think about doing this to my motherboard and CPU though.

  4. gee52717 says:

    Would this work with an AMD cpu socket? I have 99% mechanical alchohol on the way i keep getting a cpu red light upon launch i believe there may be thermal paste in the socket

  5. The Embedded Hobbyist says:

    I think the plastic cover is only letting the cold light through from the moon,thus reversing the printing method. Sorry I think I've been watching too many videos on youtube. 🙂

  6. User says:

    Thermal paper (dymo labels and such) is the worst invention ever for receipts that you have to keep for warranty purposes.
    In the old days cash registers were equipped with a tiny dot-matrix printer. A little loud, but those receipts never faded. The thermal ones have the benefit that they can print a receipt in literally a blink of an eye (some are crazy fast), but require the special paper because they don't use a ribbon or cartridge, and you're often instructed to make a copy of them if you buy something valuable, else they're gone when you need them for warranty!
    Thermal labels can not handle: pressure, daylight, alcohol, moisture, heat, glue… I mean… What was so bad about the matrix printers again? Changing a ribbon once in a while?

  7. Amit Chaudhary says:

    Happy holidays. Just found this awesome channel. 😂😂😂😂😂 Chris I thought this is a Christmas joke and to clean then you'll lite up those slots dipped in alcohol. This is main issue with me also. Dust is major issue in my room 😂😂😂. Merry Christmas

  8. Texas Tyranny Response Team says:

    you can also use soap and water if you like… PULL THE CMOS BATTERY OUT.. then put that board in the sink and scrub it with dawn dish soap… and rinse well…. set it out in the sun for an afternoon or put in an oven on low (200 f) setting and and put it back together… will work perfect.. same for keyboards that have had coffee or cola spills… throw them in the bathtub… rinse with hot water.. dont have to remove the keys… keep working rhem under water till ts all clean and works again… look at all that gunk in the water… your keyboard is nasty.. once again… drip dry and put in sun… maybe a couple days to get dry between membranes. good as new…

  9. Glen Slick says:

    Always better to have a box of Kimtech Kimwipes on hand to use for cleaning instead of regular household cleaning paper. A lot less likely to get little bits of paper lint in whatever you are cleaning.

  10. Paul de Boer says:

    "did you know that most problems with CPU's and memories come from dirty sockets" – personal experience? Also, the fading of thermal print is well known , it's the plasticizers that do this.

  11. SeanBZA says:

    Thermal paper thing is the glue in the clear plastic converting the bisophenol A and dye in the direct thermal paper label back to the clear form. Also will happen if it gets alcohol spilt on it as this also does the same. The dye changes colour depending on pH of the blend, and the glue tends to be somewhat basic, making the dye change back to the clear form. Same for the alcohol, which does the same, as reacts with the 2 components.

    Only way to have this not happen is if your printer supports using a thermal transfer ribbon, as this is a wax that is melted and adhered to the paper surface, and is not going to fade easily. Direct thermal labels are almost always going to be fading with time, depending on exposure they might last a few weeks or a few years in a dark cool dry climate.

    For the wipes use surgical wipe sachets, they are the same non woven fabric and alcohol, and are a lot cheaper. Just use some extra alcohol with them, and please clean the tabasco bottle, there are floating contaminants in it.

ใส่ความเห็น

อีเมลของคุณจะไม่แสดงให้คนอื่นเห็น ช่องข้อมูลจำเป็นถูกทำเครื่องหมาย *